Contact

Traditional luminaires are separated by several meters, so the separation creates dark rings, while the luminaires' locations create light rings. Therefore, when driving through a tunnel, we feel the light flicker as we travel through these rings at higher speeds, and this flickering effect causes eye fatigue.

We're aware of this, which is why our LED strips are waterproof, including connectors with an IP68 penetration rating. This means they can be submerged in water, regardless of whether it's acidic.

Tunnels are confined areas where gases accumulate during a fire, which is why our LED strips are extruded with food-grade silicone, a transparent, resistant and fire-retardant material. This means that when burned, it does not generate toxic gases and is halogen-free.

For mining tunnels, we manufacture 10m LED strips, joining them in 50m series. This is because tunnels often lack proper maintenance, causing the floor level to rise and trucks to hit the LED strips, damaging them. When this happens, it's easier to replace 10m than 50m. For subway and train tunnels that don't suffer from this problem, we can manufacture 25m and 50m segments to speed up replacement.

The vibration caused by mining machinery or subway wagons does not affect LED strips at all.

For high voltage LED strips we use a 220VAC live wire plus neutral or two 110VAC live wires of different phases and indistinct polarity, and for low voltage 48VDC LED strips we use an external multi-voltage driver from 100 to 300VAC regardless of the country or electrical standard.

All the colors you want are available.

We don't sell to end customers, but you can purchase the product directly from one of our agents. If there isn't one in your country, you can apply to become one.

You must apply, fill out a form, and demonstrate the type of service or product you currently provide to the mining and subway sector, for example, electrical supplier, consumables and tools supplier, or tunnel builder.

Although our LED strip is designed and prototyped in Texas, USA, due to operational and logistical costs, it is more practical and economical to manufacture and ship it to the rest of the world from our factory in Asia.